⚠️ Turn the pump and chiller off before you get in
Unplug the water pump before anyone enters the water, and make sure the chiller is off whenever the pump is off. Running the chiller without the pump can freeze the water inside the unit and damage it.
- 🧒Adults only, or with an adult right there. Children must be supervised by an adult the whole time.
- ❤️Check with your doctor first if you are pregnant or have a heart condition, high blood pressure or any other health concern. Cold water is a real shock to the body.
- 🍷No plunging after drinking. Alcohol and cold water don't mix.
- 👥Never plunge alone. Have someone nearby who can help you out.
- 🚿Rinse off first. No lotions, oils or soaps in the plunge water.
Set It Up
Start with cold tap water and the chiller cools it down fast.
- Fill the tub with cold waterFill it high enough that the pump will be completely underwater.
- Put the pump in the tubThe pump must be fully submerged before you plug it in.
- Put the return hose in the tubThis is the second hose, which carries the cold water back into the tub.
- Keep the chiller clearLeave about 20 inches of open space around it for airflow. Don't cover it or set towels on it.
- Plug in the pump and the chillerThere's an outlet above the laundry area and one by the vanity. Pump first, then the chiller.
- Switch on the chiller and set your temperatureUse the up and down arrows. See the temperature guide below.
The Temperature
The chiller's display shows three things.
CURRENTWater temp right now
TARGETTemp it's cooling to
DELAYTimer
49–52°FNuvio's recommended range
39°FColdest it can go
- 🔼Change the target: use the up and down arrows.
- 🌡️°F or °C: press the °F/°C button to switch.
- ⚡It cools fast. Watch the current temperature drop toward your target.
Take the Plunge
- Unplug the pump and switch off the chillerEvery time, before anyone gets in.
- Ease in slowlyBreathe slowly and steadily. The first 30 seconds are the hardest.
- Keep it shortNew to cold plunging? Start with 1–2 minutes. Get out any time you feel dizzy, numb or unwell.
- Get out carefullyHold on to the edge of the tub, since the tub and floor will be wet. Wrap up in a towel and warm up gradually.
- More plungers coming?Plug the pump back in first, then switch the chiller back on to keep the water cold.
When You're Done
- Switch off the chiller and unplug itThen unplug the pump.
- Take the pump and hose out of the tubSet them beside the chiller.
- Drain the tubIt's ready to use as a regular bath again.
Something not working?
If the water isn't cooling, there's a leak, or the display shows something odd, switch off the chiller and the pump and text Guest Support at (434) 285-9666.